Arm Stays

  • High performance
  • Long lasting
  • Easy to install
  • Lock in opening positionReleasable, with dampening effect

Top Hung– The releasable arm stay MARCO INOX allows the sash to be reclosed also from any intermediate opening position.

Bottom Hung– Various versions of arm stays for installation either on mullions or transoms, with weight.

Contact Us


Variations:

 

1341-(patented) Releasable arm stay in stainless steel 304, zamak counter plates, 4 preassembled grub screws M5x6 in galvanized steel. For Euro groove/NC International profiles and for grooves 10×14,3-12×15-14×18-12,5×16,5-13,5×16,5. Weight capacity: 2 arms 70 Kg.

1341.2-(patented) Releasable arm stay in stainless steel 304, zamak counter plates, 4 preassembled grub screws M5x6 in galvanized steel. For R40/New Tec profiles and for grooves 15×18. Weight capacity: 2 arms 70 Kg.

1342.3-(patented) Releasable arm stay in stainless steel 304, counter plates in black galvanized zamak, 2 cap screws Ø 4.8×13 in stainless steel 304, 2 nylon spacers, 2 preassembled grub screws M5x6 in galvanized steel. Weight capacity: 2 arms 70 Kg.

 

1344,1344.1,1344.4-(patented) Releasable arm stay in stainless steel 304, counter plates in black galvanized zamak, 2 grub screws M5x6 and 2 grub screws M5x10, pre-assembled, in stainless steel. Weight capacity: 2 arms 70 Kg.

1344.2,1344.3–(patented) Releasable arm stay in stainless steel 304, counter plates in black galvanized zamak, 4 grub screws M5x6, pre-assembled, in stainless steel. Weight capacity: 2 arms 70 Kg.

 

1345-Horizontal releasable arm stay for bottom hung casement in stainless steel 304, galvanized zamak base, 2 stainless steel 303 grub screws, 1 grub screw M5x6 and 2 grub screws M5x10 in stainless steel, 1 nylon sliding guide, 1 nylon stopping block. Fit for profiles with clearance mm 21÷31,5. Application field: Upper side horizontal assembly. Casement minimum height: 400 mm – Maximum width: until 1200 mm with 1 arm, up to 1200 mm with 2 arms. Bottom hung casement maximum opening: 200 mm. Groove of the leaf: 20 or 23 mm. Weight capacity: 1 arm 50 Kg., 2 arms 70 Kg.

 

1307-Adjustable multi position arm for top hung casement opening out, in stainless steel 430, 2 hinge pivots (5.5 mm) and 1 nylon spacer (4 mm), 4 countersunk head screws Ø 4.8×25 in stainless steel 304. Suitable for profiles with clearance of 13-18 mm. Weight capacity: 2 arms 70 Kg. Damping-effect opening restrictor arm in zamak, nylon, polyurethane and stainless steel 304, 2 grub screws M5x10 and M5x12, pre-assembled, in stainless steel 304. Damping-effect opening restrictor arm in zamak, nylon, polyurethane and stainless steel 304, 2 grub screws M5x8 in galvanized steel and 2 M5x12 in stainless steel 304.

1307.1-Adjustable multi position arm for top hung casement opening out, in stainless steel 430, 2 hinge pivots (9 mm) and 2 nylon spacers (4 mm), 4 countersunk head screws Ø 4.8×25 in stainless steel 304. Suitable for profiles with clearance of 21-30 mm. Weight capacity: 2 arms 70 Kg.

 

1307.8 – Pair of adjustable two-position arms (LH+RH) for top hung casement opening out, with open position stop device, in stainless steel 316. Suitable for profiles with clearance of 16,5 mm.

 

1343.1 – Damping-effect opening restrictor arm in zamak, nylon, polyurethane and stainless steel 304, 2 grub screws M5x10 and M5x12, pre-assembled, in stainless steel 304.

 

1343.2 -Damping-effect opening restrictor arm in zamak, nylon, polyurethane and stainless steel 304, 2 grub screws M5x8 in galvanized steel and 2 M5x12 in stainless steel 304. Adjustable multiposition arm for top hung casement opening out, in stainless steel 430, 2 hinge pivots (9 mm) and 2 nylon spacers (4 mm), 4 countersunk head screws Ø 4.8×25 in stainless steel 304. Suitable for profiles with clearance of 21-30 mm. Weight capacity: 2 arms 70 Kg.

1343.3 -Damping-effect opening restrictor arm in zamak, nylon, polyurethane and stainless steel 304, 2 grub screws M5x6 and 2 grub screws M5x8, pre-assembled, in galvanized steel.

 

1343.4 – Damping-effect opening limiter arm stay in black galvanized zamak, polyurethane and stainless steel 304, 2 grub screws M5x8 and 2 pre-assembled grub screws M5x12 in stainless steel 304.

 

1343.8L/20 – LH frictioning opening limiter arm stay, 20 cm, in zamak, nylon and stainless steel 304, 3 preassembled grub screws M5x12 in stainless steel 304.

1343.8R/20 -Like 1343.8L/20 but right hand.

 

1343.8L/60 -LH opening limiter arm stay, 60 cm, in zamak, nylon and stainless steel 304, 3 preassembled grub screws M5x12 in stainless steel 304. Like 1343.8L/60 but right hand.

1343.8R/60 -Like 1343.8L/60 but right hand.

 

1343.801 -Partial frictioning kit for art. 1343.8R/60 – 1343.8L/60, in nylon, 1 screw M5x9 in stainless steel 304.